Pressure Vessel Designer
ASME Sec VIII Div 1 & API 510In Active Development (Q2 2026)

Pressure Vessel CAD Studio Coming Soon

Storage Tank StudioTEMA Tubesheet StudioSandbox Hub
UNDER DEVELOPMENTASME BOILER & PRESSURE VESSEL CODEAPI 510 FITNESS-FOR-SERVICE

Parametric 3D Pressure Vessel Studio & Inspection Mapper

We are building the definitive engineering CAD and NDT defect mapping environment for high-pressure industrial equipment. Calculate ASME UG-27 Maximum Allowable Working Pressure (MAWP), model dished heads in real-time WebGL, and project PAUT / AUT corrosion grid scans over 3D vessel digital twins.

🔒 Zero spam. Early beta access reserved for Level II/III inspectors & mechanical reliability engineers.

Planned CAD Engine & Calculation Modules

Full ASME Boiler & Pressure Vessel Code (BPVC) and API 510 compliance built from the ground up

Parametric Dished Heads

Interactive geometry models for 2:1 Semi-Ellipsoidal, Torispherical (ASME F&D), and Hemispherical heads with ASME UG-32 crown and knuckle thickness verification.

ASME UG-27 MAWP Solver

Automated internal pressure calculation: P = (S × E × t) / (R + 0.6t), Section II Part D allowable stresses, longitudinal weld joint efficiencies (E=1.0, 0.85, 0.70), and full hydrotest limits.

Horizontal & Vertical Drums

Full support for both vertical distillation towers with skirt/lug supports and horizontal separator drums with twin saddle supports complying with Zick stress analysis criteria.

API 510 UT Thickness Mapping

Import automated crawler thickness arrays or ultrasonic grid points to visualize localized metal thinning, corrosion rates (CR), remaining service life, and next turnaround dates.
COMMUNITY ROADMAP POLL 2026 Asset Engineering Lab

Which Asset Designer Should We Build Next?

Following our TEMA Heat Exchanger and API 650 Storage Tank CAD studios, the community vote directly dictates what asset geometry our Three.js WebGL engineering team develops next.
Total Votes Cast0

Process Piping & Spool Isometric Designer

🔥 MOST REQUESTED
ASME B31.3 / API 570

3D Spool drafting with automatic CML/TML thickness inspection grid, flange ratings, dead-legs, and injection point monitoring.

0 votes0%

Boiler Waterwall & Furnace Tube Mapper

ASME Sec I / NBIC NB-23

2D/3D flattened elevation tube-by-tube wall thinning mapper, blister detection, sootblower erosion zones, and replacement panel logs.

0 votes0%

Cross-Country Pipeline & ILI Caliper Pig Visualizer

API 1163 / ASME B31.8 / API 579

Odometer stationing (KP/MP) coordinate strip, MFL magnetic anomaly defect clustering, river crossing depth-of-cover, and burst pressure calculation.

0 votes0%

Turbomachinery Rotor & Stator Blade Mapper

API 617 / API 670 / ISO 10816

Radial polar blade wheel layout for gas/steam turbines, FPI/MPI dye penetrant indication mapping, creep fatigue, and run-out vibration logs.

0 votes0%

Wind Turbine Blade & Tower Shell Inspector

IEC 61400-23 / DNV-ST-0376

Aerodynamic blade profile (Root, Max Chord, Tip) shear web delamination tracking, lightning receptor continuity, and drone photogrammetry overlays.

0 votes0%

Structural Steel & Bridge Fracture-Critical Welds

AWS D1.1 / AWS D1.5 / AASHTO

Plate girder flanges, truss gusset plates, bolted splice connections, and ultrasonic phased-array weld seam acceptance criteria.

0 votes0%
Have another specific asset or calculation code in mind?

Tell our computational geometry engineers what standards (API, ASME, ISO, NACE) and scan formats (UT grids, PAUT C-scan, Eddy Current) your inspection team relies on most.

Explore Live Production CAD Tools Today

While the pressure vessel studio is finalized, our storage tank and tubesheet studios are live with full 2D drafting and WebGL 3D twins.

API 650 Tank DesignerTEMA Tubesheet Designer
AI-Assisted Technical Reference & Regulatory DisclaimerReference Onlyℹ️ Calculates MAWP & minimum wall thickness per ASME Section VIII Div 1 UG-27 and API 510 formulas.

Technical guides, CAD geometries, calculations, and flaw criteria are AI-synthesized against industry codes (ASME, API, AWS, ISO) for preliminary reference only. This does not replace certified Level III, PE, or API 510/570/653 sign-offs. Always verify against active governing code editions before field execution.